Breaking.. 1.6D MK1 caddy pickup

[dubstep]

do you still have fuse box? with any fuses and relays?

will pm you

[joe_bo]

hi mate if you have a good one

how much for the section behind the rear right hand wheel - drivers side (in good nick) from the bottom where the inner cill and outer cill join Preferably inc inner cill if you can cut it) up to 2" above lower pressing line (not the swage line)

[mad.caddy]

Do you have the door locking pins that go into the door frame and the passenger door seal? Cheers.

[moosecaddy]

[QUOTE=joe_bo;341835]hi mate if you have a good one

how much for the section behind the rear right hand wheel - drivers side (in good nick) from the bottom where the inner cill and outer cill join Preferably inc inner cill if you can cut it) up to 2" above lower pressing line (not the swage line)

/QUOTE]

yes but Dubmonkey has enquired about them, I'll let you know fella

Originally Posted by mad.caddy

Do you have the door locking pins that go into the door frame and the passenger door seal? Cheers.

Yes. £10 for both sides, both pins. Delivered

[andydlc]

Hi Moosecaddy, saw that caddytdi wanted the top section, can I have the bottom section of the bulkhead if its not rotten...? see below pic...!



I need the front sectgion of the bed, mines rotten..

Thanks

Andy

[dickyta2]

Hello mate,do you have a working fuel gauge sender unit?

[moosecaddy]

Originally Posted by dickyta2

Hello mate,do you have a working fuel gauge sender unit?

The one on the fuel tank, the float switch ? Yes.



Loads of parts still available

[dickyta2]

Nice one,How much do you want? Posted to BB8 9HR.

[moosecaddy]

Sunday bump

[we55zas]

hi ya mate have you still got the engine 4 sale if so how much do you want 4 it mate.many thanks.

[moosecaddy]

Engine is called for by shaneo. If ha still wants it.

It wouldn't start last week, not sure why. No fuel from the injector nuts. So the pump maybe shafted.

[Mr4ndyP]

Do you have a pair of good inner sills your willing to cut from the car?

[thepedster]

ooohhhhhh long shot, but do you have the rubber cap that sits on the inside of the B Pillar by the seat belt? The large one at the top?

[moosecaddy]

Originally Posted by Mr4ndyP

Do you have a pair of good inner sills your willing to cut from the car?

I'm keeping them as mine need some welding along the sills sorry

Originally Posted by thepedster

ooohhhhhh long shot, but do you have the rubber cap that sits on the inside of the B Pillar by the seat belt? The large one at the top?

send me a pint and your address and i'll get it in the post

[wolfey]

hey you going to dub freeze on sunday

[moosecaddy]

Not this year can't be arsed, will be at UD though why do you ask wolfy ?

[Mr4ndyP]

No worries...thanks for the reply.

[retrohomeslice]

hello im looking for just a 1.6 diesel block, with out the head, price??

adam

text or pm 07812081537

[13ad13oy]

How much do you think it would be to cut off and post the roof?

Oh - Dont think I said - rec'd the inner arches - thank you very much

[smith-jack]

still got the starter motor?
how much??
also where you based