Page 1 of 2 1 2 LastLast
Results 1 to 20 of 23

Thread: Spares/Repairs 1.6gtd engine, o2a 5spd gearbox with 90mm output flanges and mountsI

  1. #1
    Join Date
    Dec 2008
    Location
    Angus/Glasgow
    Posts
    104

    Spares/Repairs 1.6gtd engine, o2a 5spd gearbox with 90mm output flanges and mountsI

    I've removed the 1.6gtd from my Caddy. I was having overheating issues, but never cooked it, which I am fairly sure was/is due to cracked cylinder head. I was going to send the head off for inspection/skimming but fancied fitting a 1.9pd. I sourced the engine and gearbox from a 1990 passat. Gearbox is rare I think... o2a 5spd with hydraulic clutch and cable shift and 90mm output flanges so no need for any driveshaft changes from original caddy. Also have the custom made 5spd o2a gearbox mounts... side and rear. Engine has been out for a year and a half and the cylinder head is removed and in bits apart from valves. I feel it would be a shame just to scrap it as it has been a good engine and I'm sure is good for spares. Free for collection from north side of Reading. Can potentially post parts, again free, if you cover the postage. Also hoping to send a van full of stuff back to Scotland in the next 2 weeks.

  2. #2
    Join Date
    Jul 2005
    Location
    North Devon
    Posts
    17,832
    Turbo/manifold and injection pump?
    PHOTOBUCKET CAN FUCK RIGHT OFF.

  3. #3
    Join Date
    Dec 2008
    Location
    Angus/Glasgow
    Posts
    104
    Aye.... got it all if you want it? Can find out how much to send down to you if you're keen?

  4. #4
    Join Date
    Jul 2005
    Location
    North Devon
    Posts
    17,832
    Yep, would £50 cover it and get you a few beers?
    PHOTOBUCKET CAN FUCK RIGHT OFF.

  5. #5
    Join Date
    Aug 2012
    Location
    Devon
    Posts
    112
    I drive London to just north of Crediton a lot Reg, next time will be evening of Friday 1st September, I can pick them up for you if Scrimsam doesn't mind meeting me at Reading services or something?

    I live in Morchard Bishop (not far from you I think) and it'd save you £50

  6. #6
    Join Date
    Jul 2005
    Location
    North Devon
    Posts
    17,832
    Quote Originally Posted by joelaurence View Post
    I drive London to just north of Crediton a lot Reg, next time will be evening of Friday 1st September, I can pick them up for you if Scrimsam doesn't mind meeting me at Reading services or something?

    I live in Morchard Bishop (not far from you I think) and it'd save you £50
    It's a good offer, but if he sends them via interparcel.com it'll be less than a tenner, £50 will still be a bargain for me - I've a NA mk2 caddy van that needs a kick in the nads to move - the turbo and pump will make an MTDI and therefore about eleventy million bhp.
    PHOTOBUCKET CAN FUCK RIGHT OFF.

  7. #7
    Join Date
    Nov 2008
    Location
    Surrey
    Posts
    2,614
    i should do that to my 1.6d

    Bargain at £50

  8. #8
    Join Date
    Dec 2008
    Location
    Angus/Glasgow
    Posts
    104
    Reg, are you after any of the pipework to go with it? Intake/downpipe/diesel?

  9. #9
    Join Date
    Aug 2012
    Location
    Devon
    Posts
    112
    Quote Originally Posted by regcheeseman View Post
    It's a good offer, but if he sends them via interparcel.com it'll be less than a tenner, £50 will still be a bargain for me - I've a NA mk2 caddy van that needs a kick in the nads to move - the turbo and pump will make an MTDI and therefore about eleventy million bhp.

    No worries bud

  10. #10
    Join Date
    Jul 2005
    Location
    North Devon
    Posts
    17,832
    Quote Originally Posted by scrimsam View Post
    Reg, are you after any of the pipework to go with it? Intake/downpipe/diesel?
    Downpipe and Intake might be useful, the feed and return oil pipes on the turbo

    Cheers!
    Last edited by regcheeseman; 15-08-2017 at 10:28 PM.
    PHOTOBUCKET CAN FUCK RIGHT OFF.

  11. #11
    Join Date
    Dec 2008
    Location
    Angus/Glasgow
    Posts
    104
    Reg, apologies for the delay... so I have removed the diesel pump, got inlet manifold, exhaust manifold and turbo, turbo oil feed and return pipes, exhaust down pipe and air intake pipe.... anything else you're needing?

  12. #12
    Join Date
    Jul 2005
    Location
    North Devon
    Posts
    17,832
    Nope - that's brilliant.

    What's your paypal?
    PHOTOBUCKET CAN FUCK RIGHT OFF.

  13. #13
    Join Date
    Dec 2008
    Location
    Angus/Glasgow
    Posts
    104
    PM sent Reg

  14. #14
    Join Date
    Dec 2008
    Location
    Angus/Glasgow
    Posts
    104
    Anyone after any other parts? Good 5spd gearbox with 90mm output cups... exhaust rear section including silencer... custom gearbox mounts. My location says Angus/Glasgow... but down in Reading... soon to be moving back home

  15. #15
    Join Date
    Jul 2005
    Location
    North Devon
    Posts
    17,832
    Got the bits today - brilliant!

    Thanks.
    PHOTOBUCKET CAN FUCK RIGHT OFF.

  16. #16
    Join Date
    Dec 2008
    Location
    Angus/Glasgow
    Posts
    104
    BUMP...... happy to help Reg. Any other takers before I take this to the scrap man?? Seems such a waste.

  17. #17
    Join Date
    May 2014
    Location
    Shropshire
    Posts
    1,248
    Don't suppose it's got a front engine mount on it?

  18. #18
    Join Date
    Jul 2005
    Location
    North Devon
    Posts
    17,832
    Injectors?

    Oil filter mounting bracket?

    Let me know what you want for them
    PHOTOBUCKET CAN FUCK RIGHT OFF.

  19. #19
    Join Date
    Dec 2008
    Location
    Angus/Glasgow
    Posts
    104
    Oil filter housing yes.... injectors gone I'm afraid.

  20. #20
    Join Date
    Dec 2011
    Location
    Kent
    Posts
    46
    Hi,

    Interested in the "Good 5spd gearbox with 90mm output cups". I assume this is for a MK1?

    Is it still available? If so please PM me a price.

    ATB, Jay

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •