Well been thinking about putting my inexperience on show, didnt take pictures of what we started with, but this is after shot blasting and progress so far.
Well been thinking about putting my inexperience on show, didnt take pictures of what we started with, but this is after shot blasting and progress so far.
continued.
Well been thinking about putting my inexperience on show, didnt take pictures of what we started with, but this is after shot blasting and progress so far.
continued 2.
If you lack inspiration just use the forum search and tinternet. Excuse the sound but I found this complilation by accident -might give you some ideas...
Maybe I should have left the S off ideas, I pretty much know what I want to achieve its just the technical knowhow to get the finished result, hence some of the niave questions I have asked,but no two ways about it the hours of reading this forum are certainly an education,and helping me,for instance todays thread about cab heating I also was thinking about a 12volt heater but its now obvious that isnt an option and I should be looking at the eberchwacker route, incidently thats what I use for the boat heating, but still waiting to see other options come up?
I have to say also that my stepson is doing all the welding and spraying so its not a completely amatuer set up only my half! if only he was as keen as me it would be finished but then I suppose he isnt the one who gets to drive it,I have got most of the stuff together for the rebuild once the welding and respray are complete and will get some pictures posted of the bits that will be used.
The engine when I bought it was a 8 valve, it also came with a 1800 16 valve that Andy the previous owner was going to fit, I then started to look at getting that engine chromed and rebuilt ,when looking into that I came across a 1800 8valve rebored to 1900, mahle pistons,schrick cam rebuilt head,well to put it bluntly the boll-cks,and on weighing it up probably cheaper to buy than trying to achieve that with the 16 valve I already had, so I did the deal and its sitting in a warm garage waiting to slot in, the engine that came out has already sold and the 16 valve 1800 kr is still for sale.The new engine is developing 176 bhp so should be ample powerful enough to get me to the fish quay and back dont you think!!!