Al
01-07-2004, 09:30 PM
I thought I would share this info with you all as its now the second time its been done;)
To fit the VR pump firstly I had to cut up some of the VR fuel tank out as I needed the plasic screw thread and the base of the plastic tank which holds the pump in:)
I then cut a large hole in the top of the caddy tank the same size as the VR tank opening, once this was done I mounted the plastic base inside the tank by by folding over the baffles, this is what the pump locates to, also I drilled 16 holes to fix the top of the VR tank to the Caddy's:
http://www.vwcaddyforum.com/pictures/fueltank280604_01.jpg
http://www.vwcaddyforum.com/pictures/fueltank280604_02.jpg
Here you can see the pump mounted on the plastic locater (this one is actually a pic from kevs VR as I did not take a pick of mine before I installed it[8)]), you can just make out the rubber gasket
http://www.vwcaddyforum.com/pictures/fueltank07.jpg
And finished off ready to be installed
http://www.vwcaddyforum.com/pictures/fueltank280604_04.jpg
PHEW....Thats another job out the way[^]
To fit the VR pump firstly I had to cut up some of the VR fuel tank out as I needed the plasic screw thread and the base of the plastic tank which holds the pump in:)
I then cut a large hole in the top of the caddy tank the same size as the VR tank opening, once this was done I mounted the plastic base inside the tank by by folding over the baffles, this is what the pump locates to, also I drilled 16 holes to fix the top of the VR tank to the Caddy's:
http://www.vwcaddyforum.com/pictures/fueltank280604_01.jpg
http://www.vwcaddyforum.com/pictures/fueltank280604_02.jpg
Here you can see the pump mounted on the plastic locater (this one is actually a pic from kevs VR as I did not take a pick of mine before I installed it[8)]), you can just make out the rubber gasket
http://www.vwcaddyforum.com/pictures/fueltank07.jpg
And finished off ready to be installed
http://www.vwcaddyforum.com/pictures/fueltank280604_04.jpg
PHEW....Thats another job out the way[^]